Submersible water pump Clean TWP 4025 and

The water contaminated in the house, garden and source should be pumped out as quickly and effectively as possible - for this, the robust and powerful submersible water submersible pump TwP 4025 and was made. It transports water with large dirt particles of up to 25 millimeters.

The Submersible Dirty Water Pump TWP 4025 and reliably promotes up to 7500 liters of dirty water at a 5 -meter -height, with a power consumption of 400 watts per hour.

Flooded basements and rooms are accessible again after the pump quickly helps, dirty water or works can be effectively pumped out - so for lagoon water, basins or cisterns. The removal of water from lakes, lagoons and rivers with spraying or complex irrigation systems can occur rapidly and easily because of its large flow. Of course, submersible dirty water pump TWP 4025 and also serves to transport clean water.

Resistant and durable quality

The TWP 4025 and is well prepared for long applications as the device is equipped with a maintenance -free engine and a thermal protection circuit in case of overheating. In addition, the high quality ceramic mechanical sealing and a wear resistant axis ensure extreme longevity.

Its sealed waterproof and impact -resistant plastic cover is suitable for underwater use up to 5 meters deep. Above a 90 mm water level, the robust pump can be introduced, starting with the pumping of dirty water, as a result that it aspires the rest of the water to a height of 35 mm.

With a gauge height of up to 5 meters, the pump can carry the standing water in the basements after a flood to the next upper stage and, in this sense, outside the home.

TWP 4025 and combines functional diversity with simple handling

The TWP 4025 float switch and continuously blocking offers the choice between automatic and continuous manual operation. In automatic selection, the pre-selected level takes care of the device to turn or off, where dried execution protection interrupts the operation of the device when at a low water level. If the buoy switch, however, is blocked horizontally in the continuous operating position, the device works in permanent mode.

Universal 25 mm and 32 mm inner diameter and 1 and 1st threaded connections allow for easy connection with other hose connections as well as pipes. The angle adapter can be adjusted as desired, so that the hoses and tubes can extend to the floor and parallel. The stable ergonomic transport handle facilitates the handling of the compact submersible dirty water pump and serves as a pump suspension when used the supplied nylon rope. The 10 m long power cord offers flexibility and a wider range of action in the wet, especially when on the support rope.

Brand quality plus the advantage of the price

Reliable, powerful and suitable for various applications in clean water: These are characteristics of the Trotec clean water submersible pumps. Thanks to its high performance, they are demands that we consider increasingly. High performance in all aspects, as Trotec is synonymous with brand quality and professional solutions with excellent value for money!

Advantages for practice:

• Strong power 400 watts to pump up to 7,500 liters per hour of 5 m deep
• Ideal for water capture as well as transfer or empty, for example, pools, basements, rain tanks, garden lakes, small holes, floods
• For pumping without clean or dirty water with microparticles of up to 25 mm
• Extremely durable by ceramic mechanical sealing
• Free maintenance engine with the integrated thermal protection circuit in case of overheating
• Automatic drive turns on/off as a function of the continuously adjustable float switch
• Protection against dry operation in automatic operation
• Possibility of fixing the buoy switch for continuous operation
• IPX8 protection - Protected against water inlet during immersion
• Universal connection to flexible connection possibilities
• Large ergonomic transport handle - to hold the drainage rope

Technical Details:

• CAUDAL MAX.: 7,500 L/h
• Granulation: 25 mm
• Height Manometric Max.: 5 m
• Depth of immersion max.: 5 m
• Minimum work height: 90 mm
• Height of calling: 450 mm
• Height Point of Off: 210 mm
• Suction water level max.: 35 mm
• Water temperature max.: 35 ° C
• Protection Type: IPX8
• Protection Class: I
• Food voltage: 230 - 240V (50Hz)
• Energy consumption: 0.4 kW
• Connection: CEE 7/4 (Schuko Type FTill)
• Cable Length: 10 m
• Dimensions (C x L x A): 160 x 160 x 310 mm
• Weight: 3.7 kg

In the order are:

The TWP 4025 submersible pump is available as a complete kit with reducer, angle adapter, 12 m long nylon rope and 10 m power cable. 25/32 mm inner diameter hoses or pipes and threaded connections of 1 ‘ / 1½‘ can be flexibly tied to the pump.