Description
DK6000A Data Cable
U/FTP CAT 6A CCA LSFH
It is supplied in a 305m wooden coil.
- U/FTP type data cable
- Solid copper conductors (23AWG)
- PE (Polyethylene) copper driver insulation of 1.30mm in diameter
- Aluminum armor + polyester blade between the blade and the outer cover
- Wire of pasta in tinned copper (CUSN)
- LSFH (Low Smoke Free of Halogen) outer coverage with 0.70mm thick and a diameter of 6.9mm
- Nominal speed of 79%
The CAT 6A (Augmented) data cable has its origin in CAT 6 and is backward with the standards of the lower categories (CAT 6 / 5E and CAT 3). Category 6a has evolved from category 6, allowing to reach transmission frequencies up to 500 MHz (each pair) and with a transfer speed up to 10 Gbps. It also has characteristics and specifications to avoid interference and noise. This type of data cable can be used in 10BASE-T compatible systems, 100Base-T, 1000Base-T and 10gbase-T.
It is characterized by:
- Comply with Aunt/EIA-568B.2-1
- Transfer speed up to 10 Gbps
- Frequency range up to 500 MHz
- Nominal impedance of 100 ohms
- Maximum conductor resistance, less than 93.8 ohms/km
